ABA 3-Layer Co-Extrusion LDPE Down-Blowing Film Blowing Machine

ABA 3-Layer co-extrusion LDPE down-blowing film blowing machine enjoys special advantages and can produce both LDPE film and PP film. It improves the physical toughness of film through multi-layer co-extrusion. With one main extruder providing material for out and inner layers, it reduces one main extruder configuration and achieves the goals of energy saving and low consumption.

All the die heads our factory produce is 40 CR materials, finally take shape after many times treatment and carefully processing. Helix is processed in the imported four-axis linkage machining center, which ensures the accuracy and the spiral ways well distributed the material. After carefully grinding and polishing, each runners of the head are plated hard chrome, which increase the die's abrasive resistance and corrosion resistance.
Die processing:
1. Material of the die: 40 cr steel, after manytimes carefully processing
2. Forging: Forging the ingredients into a coarse ring of the mold to make the molecular structure more compact
3. Lathe processing: Lathe the die with high precision lathe according to the drawing by the sophisticated master.
4. Polishing: Polish the runners, the higher the finish, the better the film
5. Chroming: Enhance the abrasive resistance and corrosion resistance
The importance of selecting the die head:
1. Material selection: If the steel is of bad quality, due to the heat-expansion and cold-contraction, the die head will greatly deform after a few times' use, the film thickness will be naturally uneven.
2. The helix inside the die head if improper processed, the spiral groove will be irregular. Uneven distribution, poor plating and unconform compression ratio can cause uneven discharging, decreasing film brightness, defective plasticizing, difficult to eliminate the fusion line etc.